Lou19 0 Posted December 1, 2006 I have two different methods of controling my 8 Ultra Speeddomes, using a Digimux with AD422 code and a 2803 code distributor with RS422. I manually move the wires back and forth - I use the Digimux to move the domes remotely over the internet and use the RS422 to move them on site. My plan is to get rid of the 2803 and use a ADDTE with SensorNet and continue using the AD422 from the Digimux. I use the R+ and R- from the RS422 connector at the dome to move the domes with the Digimux. I intend to also connect the S+ and S- Sensornet connection, at the dome, from the ADTTE. Big question - Will the dome reconize the code change and indicate "Checking Network" for a second than adapt according to code being sent? I am going to benchcheck this, but was wondering if someone has been done this already. Code mergers and converters are just too much money. Thanks, Lou Share this post Link to post Share on other sites
