mfuzzy 0 Posted December 14, 2006 anybody using the VI IP server? noticed that the frame rates setting make no difference, you only get 5 frames. that is not the real bad part, the live view is also only 5 frames. am i missing a setting somewhere? server is 32 port built on dell poweredge with 2 3.0 dual core(pentium d) and 2 gig ram. with 29 cams, cpu is 75% with view all open and about 60%withit closed. all recorded images are there. cams are axis 2420 (20 of them), axis 211 (5) and axis 213 (4). the 2420's were part of an older install. we upgraded the servers when we put more cams in and decided to go with the VI. i like the VI, but 32 cams x 5 frames is only 160 and live view should be good stream. the network is private and all fiber with gig switches. bandwidth is not the issue. cams have their own vlan. VI tech support says we should get better frames...........anybodies input would be appreciated but hoping Thomas could shed some light. Share this post Link to post Share on other sites
Thomas 0 Posted December 14, 2006 See the other thread. Share this post Link to post Share on other sites
