wildmack 0 Posted December 19, 2006 I have the CTNCOM cameras and can't figure out how to set the pre-sets. I can't find anybody that sells the correct control box for these cameras. Any suggestions or instructions would be appreciated. Share this post Link to post Share on other sites
VGMan 0 Posted December 23, 2006 PTZ Pro is a small PC-based application that supports the CTNCOM protocol and will allow you to set the presets on your cameras. PTZ Pro will also allow you to setup multiple patrol schedules, including different patrols according to time of day and sunrise/sunset. You can also control the cameras remotely over your network/Internet. PTZ Pro comes in two parts - the server program that resides on your PC-based DVR or other PC, and the remote program which you can install on any PC where you need remote control access. PTZ Pro is available on a 15-day trial basis which allow you to do all the configuration you want - and optionally purchase at the end of the trial period. You can download both the Server and Remote programs free of charge from WWW.VIDIGUARD.COM We have deployed PTZ Pro in many installations that use a PC-based DVR since the program provides much more advanced control features than you will find built into virtually all DVR monitoring applications. Share this post Link to post Share on other sites
wildmack 0 Posted December 24, 2006 Thanks for the information. I want to try the software, but I can't seem to get the required .net framework file to load. Does it have to be version 4.3.2.2? I can't find that on the web? I can find newer versions of the software, but still can't get them to load either? Any ideas, it keeps telling me I am missing files. Does the system need to be running service pack2? Dave...... Share this post Link to post Share on other sites
VGMan 0 Posted December 24, 2006 You should only require the .NET Framework 2.0 installation which you can get at this link from Microsoft: http://www.microsoft.com/downloads/details.aspx?familyid=0856EACB-4362-4B0D-8EDD-AAB15C5E04F5&displaylang=en PM me if you have any further trouble. Share this post Link to post Share on other sites