Jump to content
kerb

Avermedia NV3000 remote PTZ operation

Recommended Posts

Hi,we have our Avermedia NV3000's (latest software version) setup to allow remote control of the PTZ cameras through the web interface.

 

Does anyone know if it is possible to operate the PTZ cameras through the remote console as we prefer it to the slightly clunky web interface.

 

Am I missing something obvious?

Share this post


Link to post
Share on other sites

CMS software is OK but refuses to run under anything other than 1024x768. I'm starting to get a bit hacked off with seemingly arbitrary limitations writen into the Avermedia software.

 

Would I get more flexibility with Geovision?

Share this post


Link to post
Share on other sites

You could try PTZ Pro which is a multi-user, network enabled PTZ Control application. It supports Pelco P, Pelco D and CTNCOM protocols. You can download it at www.vidiguard.com

PTZ Pro operates independently of your PC-based DVR application and you can install multiple copies of the client control program (PTZ Pro Remote) on as many PCs as you wish.

Share this post


Link to post
Share on other sites
PTZ Pro operates independently of your PC-based DVR application

 

Now that sounds perfect, so I can stick with the Avermedia remote console, and control the PTZ with a separate app. I'll give it a try. Thanks for the suggestion.

Share this post


Link to post
Share on other sites

I spoke to my rep at iLink and they are trying to get Avermedia to add that option into remoteAP. soon as they come out with the new release iLink will posted on there web site @ www.iLinkPro.com. Until then you can use this other option recommended in previous post by VGMAn.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×