kspksp69 0 Posted January 13, 2007 Dear all I have a Geovision 1480 + 8.1 software + 16 cams and the system is running OK onsite but when I use webcam module from my home I cannot have more than 100 kbps (I remove the speed limit on the server) and I have one PTZ (Pelco) which is running OK onsite and no connection from my home, the ports are open, the popup concerning the PTZ appears but nothing else... Hope somebody can help me... Best wishes Share this post Link to post Share on other sites
CollinR 0 Posted January 14, 2007 Whats your network setup on the server end? Share this post Link to post Share on other sites
kspksp69 0 Posted January 14, 2007 Which network setup ypu want to know ? This is an XP Pro system, ADSL connected with 1Mbps possible upload, there is a Bintec router, the XP firewall is OFF and all the incoming connexions are forwarded to the PC through the Bintec.... Share this post Link to post Share on other sites
CollinR 0 Posted January 14, 2007 Test that upload speed from the server. Share this post Link to post Share on other sites
kspksp69 0 Posted January 14, 2007 I don't think this is the upload possibility because since the beginning (about 6 months), this is the same speed limit, I have not seen any higher speed then I think this is a software limitation but I don't see were... Thanks Share this post Link to post Share on other sites
CollinR 0 Posted January 14, 2007 I have never seen an ADSL connection that actually hit more then 100Kb up so I already think you are doing okay. SDSL and T1+ yes but never a ADSL connection. I admit however I push cable internet so I have alot more knowledge of it. I actually though there was a technical limit to ADSL uploads at about 500Kb, SDSL 3008Kb and VDSL ~50Mb. You might want to verify that the ISP hasn't given you a very common 1.5Mb/128Kb connection. A connection test wil do that for you, quick, easy and free. On the server how did you set up the video transmission? 16 cams at 320 in H.264 may not take more then 100Kb to transmit. Also on the client, you have to manually say 640x480 deinterlace if thats what you want. EDIT: I'm thinking your ISP is full of it, ATT.com says the fastest they can provide is 768Kb. Actually they say 512Kb-768kb, I'm thinking the 512Kb is more likely, the 282 sample 7 day average is 429Kb. Share this post Link to post Share on other sites
kspksp69 0 Posted January 15, 2007 I am in France and we have ADSL2+ which is in my case 8Mbps download and 0.8 to 1Mbps upload tested on my connexion. I have the configuration of 16 cam at 640x480 and the problem is that if I have just one cam on the screen there is about 7 FPS at 100 kbps but if I use the 16 cam I go down 0.7 FPS per cam because the rate is always the same at 100 kbps total......then I don't really understand why the system don't use 500 kbps to send more frame... Thanks Share this post Link to post Share on other sites
