zuiko 0 Posted January 18, 2007 I haven't figured out how to get the FPS in the full client yet (anyone know?), but I'd say I am getting in the low single digits for FPS. I have two signals connected to an AV-5000 with a daughter board (for 8 total connections available). This is a 120fps board. I'm not doing recording at the moment. The system is: Athlon64 3000+ nVidia nForce4 Chipset 2GB RAM nVidia GeForce 4Ti Video Card Windows XP Professional (32 bit) Any idea on things to check? Hyperthreading should be a non-issue because it doesn't support it and from what I've seen nVidia is supposed to work OK for these DVR boards. One thing I'm not clear on... if I have 8 inputs and no video signal on 6 of them, should I be able to (theoretically) get 60fps on both of the signals, or am I limited to 15fps? Either way, I'm not getting anywhere near that. I've totally impressed with the software so far... it was definitely worth giving up on my $10 ebay board with software and drivers that didn't work and dishing out the dough for a real board with real software... assuming I can get the performance to an acceptable level, anyway. Share this post Link to post Share on other sites
