Tim 0 Posted January 18, 2007 I have many ghostly looking bars marching accross my video picture, the bars are from the northeast to the southwest Share this post Link to post Share on other sites
VST_Man 1 Posted January 18, 2007 check connections and cable layout..............skeep cables away from power lines.1 ft. parrell and 90 degrees if passing over. need more info.......cable type, connector type, camera Share this post Link to post Share on other sites
Tim 0 Posted January 20, 2007 I will check into this, thanks for the tip Share this post Link to post Share on other sites
BurstElement 0 Posted February 2, 2007 1. Check the voltage at the camera, if you are using a DC power supply over a long run you might have too much voltage drop over the cable. 2. If you are transmitting over CAT5 double check that you have the video signal and signal ground running on a pair and not two seperate strands. 3. Be careful not to run the cables too close to the DVR's power supply... switching mode power supplies can make for some nasty video interference. Share this post Link to post Share on other sites
