Need advice on Good 32ch DVR card or 2 16ch Geo

[MLinks 0]

I need recommendation for good 32 channel DVR card for a custom system some thing similar to GeoVision in as far as functionality would be nice.

 

Or should I use 2 16ch GV1240 cards with GeoVision Control Center that allows remote monitoring many DVR sites.

 

One of the main requirements of this system will be Remote monitoring

 

If anyone has done this before I would really appreciate your feed back

or any suggestions.

 

 

Thank you.

[CameraGenius 0]

You should be fine going with 2 16 channel geovision cards. Remote monitoring will be very easy to setup with this configuration as well.

[MLinks 0]

Thank you CameraGenius.

 

I will go down the 2 DVR 16ch route.

[501 0]

Are you recording in 320X240 or 640x480? I was told by our supplier that the combo cards all record the same fps in 640x480 as the GV800, so you could look at the 1120 then instead.

[rory 0]

Personally I wouldnt use another Combo card .. at least not the 1120 ...

live video is not as clear as the GV800

[MLinks 0]

I was going to use 2 GV900 16ch ver 7.05 .

[CollinR 0]

Go 800 and make sure its v8.

[501 0]

I have found the live cameras the same for all the combo cards, not as good as the 800. The recorded video is about the same though. The major gain to a combo card is the TV out because I have never needed more then 1 audio input never mind the 4 of the GV800 (combo has 16).

[MLinks 0]

But what about the FPS.

 

GV800 = 120FPS

 

GV900 = 240FPS

 

GV800 might be as good as you say for Remote view, but Vs. gv900 for live viewing, I don't see how that could add up?