wahloon 0 Posted February 17, 2007 On of my customer is wanting a geovision system with the capability of watching it from his regular tv . He wants to be able to change the channel to 78 and be able to watch the dvr from there. How can I make that happen??? I know it been discussed about a year ago but can't find it on here. Share this post Link to post Share on other sites
rory 0 Posted February 17, 2007 you need a Modulator, like ChannelVision or Channelplus .. Also, if you use the combo card you can just use the DSP RCA out .. Or use the loop card and loop out each camera individually so they can each have their own channel .. or just use a T-Connector (not as good but works) ... or use a quad, or a mux .. either before it goes into the DVR, or from the loop out card ... Lots of choices .. but the bottom line is the modulator/s .. max 4 channels available typically .. Rory Share this post Link to post Share on other sites
wahloon 0 Posted February 17, 2007 You know where I can get one? Share this post Link to post Share on other sites
rory 0 Posted February 17, 2007 Channel Vision and channel plus (or one or the other) are carried by just about every security distributor ... should be easy to locate one of them . I've specifically used Channel Vision products myself. Rory Share this post Link to post Share on other sites
