blowrabbit 0 Posted February 18, 2007 I've got a ge dvmre ct-16-A that is hooked up to 5 cameras and set up for remote view via a dsl line , router, ect. It has worked fine for about 6 months but now when I access it the pictures randomly change from camera to camera. In other words in wavereader what was cam 1 has become cam4 and back and forth with some cams being shown twice at the same time? Its a mess needless to say. I also have a dvse / 50 pin cable hooked up to it for extended storage. Any ideas?? Share this post Link to post Share on other sites
rory 0 Posted February 18, 2007 Have you checked the cameras at the site? Normally this indicates one or more cameras have cable/power issues, with the GE DVRs anyway. You'll have to go there physically and take one camera off at a time until it stops doing it. You can try to disable one at a time remotely also. Share this post Link to post Share on other sites
SBTVideoman 0 Posted February 28, 2007 It may not be caused by a camera problem on site. Do you know what version of firwmare you are running? Is it a 4.xx unit or one of the newer "Wavejet" 5.xx CTII units? Share this post Link to post Share on other sites
