gothiclimodriver 0 Posted February 26, 2007 I have a dilemma,i have a voltek 1870 day/night camera,the plug at the end of the cable was missing when it was given to me what i would like is to put a scart plug or two av plugs on the cable so i can plug this into a vhs recorder,there is five different coloured strands at the end of the cable which are red,a bare wire which i think is earth,white,green and yellow any help or a diagram would be greatly appreciated as this is my first post i do hope i have made some sense. gothiclimodriver Share this post Link to post Share on other sites
kensplace 0 Posted February 26, 2007 I think those are often used with the vcr controllers, manual here http://www.voltek.co.uk/htms/Inst_CT220/index.htm I have a similar one, red would be +12v yellow is video signal black is 0v green PIR sensor output blue audio light level white (not sure what thats for, maybe to switch to day/.night mode?) Check the link, see if its the right one, the above is how I would test it, and how the similar cams I have had have been wired but remember, it may not be that way, so its at your own risk! Share this post Link to post Share on other sites