sf1964 0 Posted March 3, 2007 l have 2 dvrs(using only one right now) and wanted to add more cameras so l would need the extra dvr.The current one l am using is the icrealtime 8 ch pro which l prefer and l view from home over the internet.the other dvr that l used before which is decent but not as good is the nuvico 16 ch.the question l am asking is how can l add the nuvico dvr to my existing system,ie adding 3 more cameras using one monitor(or would l have to buy another monitor) and how does it affect viewing over the internet ie using 2 different softwares?? how could l set this up,l dont have to view the nuvico dvr over the internet or if there is a way please let me know,thanks in advance. Share this post Link to post Share on other sites
galen 0 Posted March 3, 2007 You will need an A~B switch to go into one monitor on site. Unless you have a monitor that supports two different sources. Which you may have. You will need to plug the second dvr into a router and close the other icr software out before opening the other. The router will take care of sending you to the right dvr. The dvr will respond to the software. You may be able to open both at the same time but your bandwidth would suffer. Share this post Link to post Share on other sites
