securicorp 0 Posted March 12, 2007 Has anybody used the GeoVision POS system with a till? I'm interested in how good it is and how to install Thanks Share this post Link to post Share on other sites
cctv_down_under 0 Posted March 14, 2007 yes I have but I had to modify the firmware as it was not very powerfull, it is not a good solution because it will only allow you to serach through what is printed on the reciept...therefore things like open department sales or corrections on the reciept will not show up. There are better solutions that are at a software level, these use electronic software journals to read the entire data, this means you can filter right down. IE monitor Operator 45's transactions that were authorised by a supervisor, that had a staff discount of more than x% and contained ciggarettes and included voids that were over $50. Basically it is cheaper in the long run for larger POS (IE multiple lanes) because you do not need to pay for multiple data capture box's per register...mind you there is a way to use 1x Geovision data capture to do all registers...but that is my little firmware upgrade Share this post Link to post Share on other sites
