MTS 0 Posted March 18, 2007 I've been using an Everfocus 4cam multiplexer for 2 months now with no problem. Then...... -Monitor output failed, now only the VCR out works. -When power is applied all 4cams on quad view flicker then switch to solid and a reversed picture within a second. -This multiplexer does NOT have any 'reverse' options -AC and DC power options carry the same problem Could the power to the cams are receiving be ,messed up? Any help is greatly appreciated! Thanx Share this post Link to post Share on other sites
videobruce 0 Posted March 25, 2007 Power down, disconnect all cameras, remove AC power for one minute to the device, re-connect one camera and power up. Then try. Is there some master reset? Share this post Link to post Share on other sites
Deluxecctv.com 0 Posted April 1, 2007 If the suggestion that the person wrote above me does not work, you may be facing a hardware issue. I had the same problem with a unit a while ago. It turned out that the video board went bad on the unit. I would contact the manufacture and ask some questions before you throw the thing out. Or we might be able to repair it depending on the model number. What unit do you have? Share this post Link to post Share on other sites
