Jump to content
MTS

Reverse picture and flicker problem in Multiplexer

Recommended Posts

I've been using an Everfocus 4cam multiplexer for 2 months now with no problem. Then......

 

-Monitor output failed, now only the VCR out works.

-When power is applied all 4cams on quad view flicker then switch to solid and a reversed picture within a second.

-This multiplexer does NOT have any 'reverse' options

-AC and DC power options carry the same problem

 

Could the power to the cams are receiving be ,messed up?

Any help is greatly appreciated!

Thanx

Share this post


Link to post
Share on other sites

Power down, disconnect all cameras, remove AC power for one minute to the device, re-connect one camera and power up. Then try.

Is there some master reset?

Share this post


Link to post
Share on other sites

If the suggestion that the person wrote above me does not work, you may be facing a hardware issue. I had the same problem with a unit a while ago.

 

It turned out that the video board went bad on the unit. I would contact the manufacture and ask some questions before you throw the thing out. Or we might be able to repair it depending on the model number. What unit do you have?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×