Diginet stops recording by itself

[gremlinza 0]

I got a diginet 16 channel card that keeps stop recording for a few hours then start again by itself. I turned of auto reboot but still dose this. It isn an intamitted problem . Using Kodicom Ver.4.130P8 software.

 

Also i cant get rid of the windows logon screen so i need2 logon manualy evrytime i start the dvr.

sorry got the selution for auto logon my mate helped me there

whent to run and entered

control userpasswords2

 

and disabled it there

[dvr1001 0]

it will only record on motion if you have it set that way, check the recording schedule in the setup to see how it is set to record, you should also check the motion setup for each camera.

[gremlinza 0]

The motion is setted up fine. The problem i got is that the card seems2 stop working. All 16channels shows black and when i restart the software it dosent fix the problem. Only if i restart the system the picture will come back. I turned of all power opsions and screansaver with no luck. I have the exact same problem with a difrent diginet card but same moddle adn make on tataly difrent hardware

[rory 0]

Hi, is this a Kodicom System or card?

if a card, where was this card purchased?

 

thanks

Rory

[gremlinza 0]

Hi, is this a Kodicom System or card?

if a card, where was this card purchased?

 

thanks

Rory

 

its a card and i dont know ho the suplyer. Some sort of generetic card.

Will try and take a photo and post it thanks.