Jump to content
Sign in to follow this  
iBkickinit

DIY License Plate Capturre solution for home system???

Recommended Posts

I am in the process of installing a 10 camera system at my house, using a geovision 16-channel card. My house is situated on the corner of a t-intersection, but the front of the house is set back 30-50 feet from the street, so the wide angle cams can't make out much detail on vehicles going by. I would like to find 1 or 2 dedicated cameras to position just to get closeups of cars going by. Is it best just to get a high quality camera with a good tight lens to focus on the street? I was curious if there was a suitable way to integrate a Megapixel caera, and set a motion zone in geovision that would trigger an output and tell the camera when to snap a photo... Any suggestions are welcome...

Share this post


Link to post
Share on other sites

A 5-50mm varifocal lens will get you number plates at that distance and

allow plenty of room for maneuver.

 

The problem comes when the light goes low and car headlights come on.

Most cameras will tend to close down and everything but the headlights will

then appear black. Better quality cameras with Wide Dynamic Range will

give better results but best results are obtained with specialist LPR

cameras built for the job. I suggest you google 'License Plate Recognition Camera'

to get a better understanding of what is involved.

 

Rory is better equiped than I to answer your Geo question.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×