cycop 0 Posted March 31, 2007 Hi, is it possible to connect the CAM to a TV directly? how to do it? thanks Share this post Link to post Share on other sites
rory 0 Posted March 31, 2007 Yes, use the A/V input such as RCA, and get an BNC-RCA Adapter. Share this post Link to post Share on other sites
cycop 0 Posted March 31, 2007 does the BNC-RCA cable normally comes with the TV? Share this post Link to post Share on other sites
rory 0 Posted March 31, 2007 just need an RCA cable .. you can get them from any electronic store ... you may already have one lying around from a digital camera or other device .. then you can use the BNC-MALE to RCA-FEMALE Adapter ... Or for higher quality use Coax (RG59 Copper in and out, solid center) and use a BNC-FEMALE to RCA-MALE ... Better yet, depends on the camera, if it has S-VHs out .. use that for even higher quality. You would simpy need the S-Vhs cable. RCA cable is pretty much the most common method though. Share this post Link to post Share on other sites
cycop 0 Posted April 1, 2007 why is it that the image on TV is so much better than the image from my DVR card. What could be wrong here? Share this post Link to post Share on other sites
