newbie ! help with wiring a JVC TK-C675E dome to PCDVR card

[magpie 0]

Hi

Please could anyone help me with wiring up my JVC TK-C675E ptz dome to my X-Vision pcdvr card ?

The dvr card has ptz function and pelco protocol, The dome has bare end fly lead 7 cables plus coax

there is a brown,blue and earth (green n yellow)

then red =TX+ ,orange = TX- ,yellow = RX+ and green = RX-

plus the coax

I assume i need a RS232 to RS485 to attach to my pc to control the PTZ part and I just need to conect the coax to the DVR card

I allso assume i just get a 24v 1.6a supply to run the power

is there anything i need to bridge the gap between the camera and the pc ?

easy on the tech talk as I am new to this lol

cheers

steve

[magpie 0]

It looks like I am on my own here lol

Any guidance would be appreciated here

I have searched through the other listings and cant quite get the answers i need

[videobruce 0]

A quick search turned up this camera was introduced in 1999 in the UK, but I couldn't find anything on it.

[magpie 0]

Thats the problem i am finding lol

I have no manual for the camera

I assume i just conect to a RS232 to RS485 converter

but not sure

I will keep searching

its a new toy for me so itching to get it working lol

[videobruce 0]

Where are you located? I would contact JVC first.

[magpie 0]

I am in the UK and i am still waiting for JVC to get back to me.....

basic info i need is wot wire goes where

i know the coax is connected to the dvr card and the other wires will need connecting to the serial port via converter, but which ones ?

its all good fun