SMS transmission trhough Geovision

[kspksp69 0]

Dear all

 

Which module do I need to connect to my Geovision to use the alarm detection and transfert with SMS and GSM Call of the system ?

 

I have understood that a Telit 862 can be used but there is many 862 type module and I cannot find the correct one ....

 

Best wishes

[CollinR 0]

You might also consider an email>SMS service. Then you don't need a GSM modem and monthly payment.

[kspksp69 0]

The problem is that if the phone line is destroyed I will not be alble to send email, I then prefer to have a GSM modem, then which one could I use to have a good compatibility with the geovision

 

all the best

[CollinR 0]

You are better off integrating Geo IO with a real burglar alarm system.

 

If you get something like an ademco v15p and a 7845GSM radio you'll have real deal functionality on both sides however you won't have access to the video. Of course it's pretty worthless over SMS assuming you went the modem route.

 

You will probably need zone expander, a GVNETIO and possibly a GV IO depending on the number of actions you want performed.

 

 

 

Then shop for budget UL listed monitoring companies that support alarmnet.

 

IIRC NextAlarm.com can do this for something like $15/mo including the alarmnet GSM access.

 

Make sure and tell them not to dispatch on the zones controlled by Geo or you will quickly rack up a bill from the city.