jeromephone 6 Posted May 9, 2007 I have a geo 1480 with 16 channels audio customer complained about losing 8 min of recording of activity it seemed that it has worked since and before and all other cameras were/are working. Plenty of harddrive space. Only happened as far as we can tell on one camera Any ideas Share this post Link to post Share on other sites
kensplace 0 Posted May 9, 2007 Anything in the geovision logs? Video loss, stopped monitoring etc? Share this post Link to post Share on other sites
CollinR 0 Posted May 9, 2007 Was there motion? I mean 8 minutes...??? Share this post Link to post Share on other sites
CameraGenius 0 Posted May 9, 2007 probably no motion Share this post Link to post Share on other sites
jeromephone 6 Posted May 19, 2007 we were back at the customer site and they said that there was motion as this is a classroom and it had kids in it at the time. THe video clips also show a solid blue start playing drop a min or so again showing the blue background. apparently is happening on multiple cameras also. Share this post Link to post Share on other sites
survtech 0 Posted May 19, 2007 Does Richard Nixon's former secretary work there? Seriously, how is the camera powered? I've seen many situations where camera power was disconnected accidentally by someone wanting to use the outlet or checking breakers or a myriad of other reasons. If all else fails, check and/or replace the DVR's hard drive. Share this post Link to post Share on other sites
rory 0 Posted May 19, 2007 if its set to motion detection, then this is normal. If it is, what are the motion settings? Share this post Link to post Share on other sites
CameraGenius 0 Posted May 21, 2007 sounds like at some point everyone in the classroom is just not moving much and nothing is being detected by the cameras as movement to start recording Share this post Link to post Share on other sites