Slave monitor

[nalexia 0]

Hi

 

Is it possibe to view selected channels on a second monitor on the GV800 version 8. the system running the software would be situated in the back office viewing all channels and a monitor only situated in the shop for the staff to monitor selected channels only.

 

Cheers

[CameraGenius 0]

the GV-MULTIQUAD card will allow you to do this

[CollinR 0]

You are better off getting the loop through and a seperate switcher. That multi-quad is crazy high for what you want.

 

All you do it loop out only the cams you want on the second monitor and setup the switcher.

[vf702 0]

Depending on the quality you need, the remote viewer may be a less expensive option. (if you have an extra networked PC in that area)

[nalexia 0]

Hi guys

 

Thanks for the info i do have another pc next to where i want to site the monitor which is used for the till and is also networked to the computer with the geo operating system but it runs on windows 98 so i am thinking it isnt capable of utilising for my purpose.

 

cheers

[tpolus 0]

Hi guys

 

Thanks for the info i do have another pc next to where i want to site the monitor which is used for the till and is also networked to the computer with the geo operating system but it runs on windows 98 so i am thinking it isnt capable of utilising for my purpose.

 

cheers

 

No need to use another computer. Replace your graphics card to support 2 monitors (for example, two connectors: VGA + DVI, costs 60-70 USD). Then use DMPos.exe program to setup Geovision system monitor layout: 1 monitor - Geovision main system, 2 monitor - Geovision MultiView network application connected to "localhost" address (local geo web server).

[nalexia 0]

Hi

 

i was wondering if that was possible as i already have a graphics card installed (geforce 7300gs) with two outputs but wasnt sure if i could restrict the amount of cameras to be viewed by the staff

 

Cheers

[tpolus 0]

Hi

 

i was wondering if that was possible as i already have a graphics card installed (geforce 7300gs) with two outputs but wasnt sure if i could restrict the amount of cameras to be viewed by the staff

 

Cheers

 

You can do that, just use Local account edit to setup permissions for WebCam (there is a checkbox for camera and audio channels). You can also prepare many different layouts of cameras by creating "multiple hosts" in MultiView.

[nalexia 0]

Hi Tpolus

 

Thanks for the info sounds a great idea and i only need the lead to the monitor thanks again for your help.

 

Cheers