pk5 0 Posted May 9, 2007 Hi everyone Sorry but i still could not my router / dvr setup to work outside of the house. here is what i currently have it set up as: DVR setting local ip: 192.169.0.11 port: 8080 Linksys setting: DNS set to connect to router. port forwarding: name: DVR local ip: 192.169.0.11 port: 8080 - 8080 protocol: both I can connect to the dvr locally using the local ip address, or i can even connect to it locally using the dns name address (with a 1 minutes delay for video streaming). But i can't connect to it from outside the house. I called my satellite company, and they said that they do not block any port. Is there any thing that i did wrong so that the dvr refuse to connect? I am assuming right now it's the router problem, but i don't see any option relating to firewall or blocking incoming traffic. thanks Share this post Link to post Share on other sites
CameraGenius 0 Posted May 9, 2007 do a port scan to check from the outside: http://www.t1shopper.com/tools/port-scanner/ Also check here to make sure your forwarding correctly: http://www.portforward.com Share this post Link to post Share on other sites
pk5 0 Posted May 9, 2007 Currently i have the WAP54G router, and when i use the scan service above it said: The host ###.dyndns.org does not have a service running on port 8080 it seem like i have the "block annonomous request box checked", so i'll check it when i get home, and report back on what i have. Thanks Share this post Link to post Share on other sites