miguel_adrian 0 Posted May 22, 2007 I install Geovision 8.1 but when I connect the cameras these do not give video… that I must do? Ther server have: Pentium IV 3.2 Dual Core Memory 1 GB DDR2 533 MHz 750 GB Hard Disk (3 x 250 SATA ) MainBoard Asus (Not have chip VIA) Too have other Problem Constantly it leaves the error " Runtime Error C++..." in version 8.0, to that it must east error ? ? ? Share this post Link to post Share on other sites
rory 0 Posted May 24, 2007 Hi, what type of video card is it? Also what is the mother board model number? Share this post Link to post Share on other sites
miguel_adrian 0 Posted May 24, 2007 Hi, what type of video card is it? Also what is the mother board model number? Now i have: Motherboard PC-Chips P25G Ver: 3.0 ATI Radeon 9250 - 256 MB Video Card GV-800 Ver: 3.31 Pentim IV 2.40 GHz 1 GB DDR Memory Ram 250 GB Hard Disk Share this post Link to post Share on other sites
miguel_adrian 0 Posted May 24, 2007 is this a legit card? Whats si Legit???? I install very good drivers & Software (Geo 8.01 AND 8.1) but when software is running tha cameras say Video Lost Share this post Link to post Share on other sites
photys 0 Posted May 25, 2007 English: A few ideas. Check your Db15 is connected to 1-8 not 9-16 Card should run V8 softwear, but try v6 Try a DVD input to test the card, then connect your cameras directly to a TV to test cams Confirm your cameras are getting sufficient power. Español....kinda: Un par de ideas. Confirmar tienes las cables del tarjeta geovision connectado a 1-8 no 9-16. Tarjeta v3.31 sirvie con v8 pero descargar y installar v6 para probar. Tambien, connectar una DVD or algo con señal fuera. O connectar las cameras directamente a su téle. Las cameras tienes sufficiente potencia? Share this post Link to post Share on other sites
CameraGenius 0 Posted May 25, 2007 legit = not fake Share this post Link to post Share on other sites
