Sensormatic protocol for DVR

[gonzo 0]

Hi,

 

I am in a DVR proyect which need to handle some American Dynamics domes using the Sensormatic Protocol.

 

I have been looking over internet to find the Sensormatic Protocol code sheet ( with the hex commands ) to implement it on my dvr software, but no good luck.

 

If anyone can help me on this, I will really appreciate !!!

 

Thanks

[cro70 0]

I have some protocols (422 / 485). I hope will be usefull. I will look for the sensornet protocol.

It is in a PDF format, so please send me a mail to cesar.ortiz@ssamexico.com and I will send it to you

 

rgds.

[dtonsberg 0]

Hi,

 

I am in a DVR proyect which need to handle some American Dynamics domes using the Sensormatic Protocol.

 

I have been looking over internet to find the Sensormatic Protocol code sheet ( with the hex commands ) to implement it on my dvr software, but no good luck.

 

If anyone can help me on this, I will really appreciate !!!

 

Thanks

 

You can also try Jim Sennecker at www sennetech dot net

 

Sennetech is a company that has protocol converters ---- Good Luck

[peppe 0]

The protocol you are looking for is named "AD422" and is the open one.

 

Just worked with it yesterday so drop me a mess if you run in to problem.

I also have it in a PDF or use google.

 

You can run it with rs422 or rs485 with AD422@4800,

for sensornet input you need some kind of AD controler ADTT16, AD2088 and so.

 

It also can be run as Pelco@2400/9600.

 

Mr. pePPe

[galaxy60 0]

You should be able to address the domes from 600 onwards and this should enable them to work with Pelco protocol if this helps ???

[CCTV_Suppliers 0]

Hi,

 

I am in a DVR proyect which need to handle some American Dynamics domes using the Sensormatic Protocol.

 

I have been looking over internet to find the Sensormatic Protocol code sheet ( with the hex commands ) to implement it on my dvr software, but no good luck.

 

If anyone can help me on this, I will really appreciate !!!

 

Thanks

 

Besides UltraDomes protocols, which other ones do you have working? If you already have Pelco D protocol, then you are styling, because you can program American Dynamics UltraDomes to operate with Pelco D protocol by programming these domes via built in DIP switches.

 

Hope this helps.