blowrabbit 0 Posted May 27, 2007 does anyone know the specific jumper settings for a cbr-pb2-ka2 probridge unit. It is to enable controlling a cyberdome Ptz remotely via wavereader thru a dvrme. Notice the 4 jumpers far to the right and in the middle, and notice the 12 pins without any jumpers along the top. It is these that i need to know how they should be jumped or not ? I ask this as I screwed around with the settings, setting it to a panasonic protocal at one time. when this is hooked up the 2 utp wires from the probridge should provide the comands to move the ptz and the picture should go up the coax. any help is greatly appreicated... Share this post Link to post Share on other sites
