iSpyVision 0 Posted June 21, 2007 I'm looking for a PTZ controller that will allow a PTZ using Pelco D to Pan in the day until a certian time then move to a fixed position until the next morning in which it would start panning again. Any ideas? Thanks Share this post Link to post Share on other sites
kmurrey 0 Posted June 21, 2007 I would think that the software itself would allow you to setup a 'tour' that would switch automatically. Share this post Link to post Share on other sites
iSpyVision 0 Posted June 21, 2007 Unfortunatly it does not. The present controller will only let you set up a pan or tour but there is no way to set up a time schedule between the pan and the preset. Share this post Link to post Share on other sites
VGMan 0 Posted June 22, 2007 If you can control the PTZ from a Windows PC or Windows-based DVR try out PTZ Pro from www.vidiguard.com This provides time of day, day of week and sunrise/sunset scheduling of multiple PTZs PM me if you have any questions about setup and configuration. Share this post Link to post Share on other sites
UVS 0 Posted June 25, 2007 I'm looking for a PTZ controller that will allow a PTZ using Pelco D to Pan in the day until a certian time then move to a fixed position until the next morning in which it would start panning again. Any ideas?Thanks if you will use PC , we have the solution to send camera to a fixed position on schedule, does your camera support pre-position if not then there is no solution, thanks Share this post Link to post Share on other sites
cctv42 0 Posted June 26, 2007 Hmm thats a hard one. I know ones that you can program a tour but i don't know one off the top of my head that can sync it with time. I do know ones where you can connect remotely and turn of tour very easily but i don't know of that would work for you. Though many pc based systems have it built in on there settings. Share this post Link to post Share on other sites