photys 0 Posted June 30, 2007 (edited) Recording locally with no NVR? It this viable? Outline: Four different locations. 2 Axis 207 cams per location. 1 QOS router per location. 1 NAS (network attached storage) per location. I want to record locally to an NAS or similar. Draw recorded images from the NAS over the internet. Looking at the Axis GUI, I see the following in Event settngs: "triggered by" - "motion detection" - "when triggered" - "Upload images/video". Which in theory could save to the NAS. But would the client softwear know where to find the NAS If its viable, What softwear do you recommend. What NAS do you recommend. Thanks for your time, photys. Edited July 13, 2007 by Guest Share this post Link to post Share on other sites
metafizx 0 Posted July 12, 2007 I think in that case it is just FTP. you have to have FTP server running to accept connections from the cameras. Share this post Link to post Share on other sites
zmxtech 0 Posted July 12, 2007 I use a 2130 and use Axis's free 1 camera dvr software and use a mapped drive to the nas but you can ftp -i'll check tomorrow 4u Share this post Link to post Share on other sites
photys 0 Posted July 12, 2007 Thank you both for the replies. I have seen some basic brandnamed NAS with built in FTP server. I may pick one up and give it a try. Share this post Link to post Share on other sites
zmxtech 0 Posted July 13, 2007 yes FTP upload it there under network >Dynamic IP Address Notification down the bottom z Share this post Link to post Share on other sites
photys 0 Posted July 13, 2007 Thanks zmxtech. I appreciate you taking the time to check. Share this post Link to post Share on other sites