stress3 0 Posted August 7, 2007 Hi there guru's ! i am in deep water, with great white sharks around me with pirahnas nipping at me gluttemus maximus ! i need help of the procedure to set up this dvdr(Colossus pro), i have taken this job from someone who was sacked from it, for sloppy workmanship i have no installation manuals for it and reqiure help setting up remote viewing via router, a basic outline would be greatful, just for me to work on, if there is anyone who can assist in this with a detailed outline then i will be truley greatful. Thank you from a jedi that can not feel any force other than a hand in my back escourting me towards a door ! if i do not come up with better results than the other jedi !!! Share this post Link to post Share on other sites
ezCCTV 0 Posted August 8, 2007 The Colossus Pro I believe is a rebranded HikVision DVR. I have had a look throught their website, and found a manual. It appears that you only need to forward one port. On the DVR you can dictate the IP address, and HTTP port (default 80) You can find more info on Port forwarding for many routers at http://www.portforward.com Click on Guides Click on Port Forwarding Guides by Router Locate your Router Click on Default Guide You should be able to find a manual from the following page. http://www.hikvision.com/en_Service_list2.aspx?classid=82 Hope this helps a little. Share this post Link to post Share on other sites
stress3 0 Posted August 8, 2007 Hello James ! U r The man, Everything that i need was all within the one link ! Cheers dude ! Share this post Link to post Share on other sites
ezCCTV 0 Posted August 9, 2007 No Problem. Glad to hear it! Share this post Link to post Share on other sites