jefinny 0 Posted August 11, 2007 This is the simple steps for DIY your surveillance system in home security. 1. Confirm you have bought all for the systems, Including Security camera, housing, bracket, Digital Video Recorder system, Monitor and accessories such as video cable, plug, power adapter, enough screws, BNC connectors 2 .Select a camera location near the target area, then mount the camera using a provided bracket. 3. Confirm your systems come with plug and play power and video cables. Connect one end of the cable directly to the camera. Connect one end of the cable directly to the camera. 4. Connect the other end of the cable to the Digital Video Recorder and the plug-in power adapter. 5. Repeat steps 1 through 3 for each camera. 6. Connect the Digital Video Recorder to the monitor. 7. (Optional) For remote video monitoring over the web, connect the network cable from your high speed modem to the DVR. 8. Turn on your system and begin monitoring your home or business. Share this post Link to post Share on other sites
imcclendon 0 Posted August 11, 2007 These instructions might be adequate if you install cameras for a hobby, but if you require a cctv system for asset protection or for theft identification, these instructions are oversimplified and are no replacement for an installation by a qualified security installation tech. Unless you have the years of experience and technical expertise to install a properly configured video surveillance system, you should contact a qualified installation company for proper protection of your home or business. Share this post Link to post Share on other sites
jefinny 0 Posted August 13, 2007 yeah, this is only for the simpliest home security system. For a little bigger Security system or more complicated security system, Customers should find a installer to design and install the security system according to the surveillance environment and demand. jefinny from Rekeen Electronics Share this post Link to post Share on other sites