Ck1 0 Posted August 12, 2007 Im new to the site, i currently having problem with Vista MPEG4 - 4CHANNEL DVR, when the system is wired up the picture is really bad like there is some interference, Ive checked all the connectors, and cameras but with no lucky at solving the problem. Has any one else come across this, any help / suggestions is much apreciated. thanks in advanced Share this post Link to post Share on other sites
UMDRanger 0 Posted August 13, 2007 Have you tried viewing the camera feed by hooking it up to a tv monitor with a RCA jack? Can you describe the interference? Share this post Link to post Share on other sites
scorpion 0 Posted August 13, 2007 Man! Sounds like trouble! Here is some info from the Articles section. Scroll down to the bottom, and you will see some info for you. http://www.cctvforum.com/cms_view_article.php?aid=42 Here is some info from a thread where someone had problems http://www.cctvforum.com/viewtopic.php?p=62346&highlight=#62346 I hope this sheds some light on you plight! Scorpion Share this post Link to post Share on other sites
Ck1 0 Posted August 13, 2007 the interference which i seeing is like the monitor needs to be tuned in, i will try the jack into the monitor, thanks for the suggestion, Share this post Link to post Share on other sites
photys 0 Posted August 19, 2007 Just read this and thought of you. Why does my video look like a scrambled Cable TV signal?This typically indicates reversed polarity. From the bottom of this page http://www.nvt.com/learning.html Share this post Link to post Share on other sites
smokkill 0 Posted August 24, 2007 Is it terminated properly? Share this post Link to post Share on other sites
