burgertseng 0 Posted September 10, 2004 want to know everybody's opinion about pan/tilt and scanner. Are they good? Share this post Link to post Share on other sites
rory 0 Posted September 10, 2004 which one? Id rather add more fixed cameras, but then if you can afford it, its cool to use a pan tilt like from Pelco for each fixed camera. I dont like their controllers though, but still they have some nice features instead of just a plain fixed camera. Zoom with Pan Tilt (PTZ) is even nicer though. Share this post Link to post Share on other sites
burgertseng 0 Posted September 10, 2004 Manufacturer of pan/tilt http://www.changan-motor.com/ Share this post Link to post Share on other sites
Cooperman 0 Posted September 10, 2004 Pan & Tilt or Scanners are very useful in certain situations, in support of fixed cameras. Where they are used instead of fixed cameras, it's often a recipe for disaster. I agree with you Rory, more often than not additional fixed cameras are preferable. Share this post Link to post Share on other sites
rory 0 Posted September 10, 2004 yep, the price of the scanner can buy you one or 2 extra cameras in some cases .. they have a lot of banks down here that use 1 camera for the entire bank, on a scanner! Share this post Link to post Share on other sites
Cooperman 0 Posted September 11, 2004 Rory, I'd keep that one a bit hush hush .... security, if you get my drift ... Share this post Link to post Share on other sites
mk 0 Posted October 29, 2004 Have a look at the new Ipix cameras. Ipix have a unique IP camera that enables you to view and record a 360 degree x 180 degree image, eliminating any blind spots that you would normaly encounter with a standard fixed camera. Have a look at the web site www.ipixsecurity-uk.com Share this post Link to post Share on other sites
rory 0 Posted October 29, 2004 check this one out, uses standard BNC also.. http://www.cctvforum.com/viewtopic.php?t=713 Share this post Link to post Share on other sites
