GV-800 Will TPZ work

[GunRunner1 0]

I bought a system that came as a DVR that also has windows XP on it the manual says GV-800. There isa cd. that says GEO Vison.

In the manual it says select make and model of PTZ.

 

Will this system operate A PTZ with out anding more hardware ect.

If so will it work with a older Pelco pan tilt and a Computar zoom lens?

 

Thanks,

[kensplace 0]

If you are talking about the pan tilt/lens from your other post, then no, you would need a telemetry system in place that geovision could control.

 

You would either need a telemetry receiver capable of receiving rs232 or rs485 etc signals (but you would need an adapter for your serial port, or a geo addon to convert your pc serial to rs485) or a telemetry controller that can receive the same, linked to a receiver.

 

Its the receiver that powers the lens/pan tilts, it receives data from either the pc (via geo) or from a controller that receives control data fom the pc (geo).

 

You wont be able to directly interface that pan tilt and lens without additional hardware.

[GunRunner1 0]

O.k. Thanks,

Ya the more I thought about it the more I could see it would not match up.

Guess It would be better to get a stand alone unit.

[owlsecurity 0]

it`s better to use stand alone

[rory 0]

O.k. Thanks,

Ya the more I thought about it the more I could see it would not match up.

Guess It would be better to get a stand alone unit.

 

For PTZ you simply add a small card (GV-NET) which costs less than $50 retail.