photys 0 Posted August 22, 2007 Hope to fit some Axis/Panasonic IP cams in standard outdoor camera housings. Yeah i know, "google it" but im getting conflicting info :/ Share this post Link to post Share on other sites
kensplace 0 Posted August 22, 2007 I dont think there is really such a thing as a standard, they come in all different shapes and sizes, from the tiny ones, up to the gigantic ones that are all over the UK, the ones with IR/Washers/Wipers etc bolted all over them. You would probably have to find out the dimensions of what you want to fit inside, then look for one bigger than that, so you know it will fit in. Allow a bit extra room at the back in case it has heater/fan/circuit boards etc. A little extra height, as you need to mount the camera inside it..., and a little extra width to work in.. Share this post Link to post Share on other sites
scorpion 0 Posted August 22, 2007 Eclipse Branded OEM ECL-605 No heater/blower/IR ON box Size: 373X140X115m/m Inside measure side to side 4 1/4 American inches. Top to bottom 4 inches Front Glass to back 12 inches This has a "mansured" Like an a frame with the top cut off. err it is not square. Share this post Link to post Share on other sites
photys 0 Posted August 22, 2007 Thanks guys. Looks like I could make it. Need: 8.5cm x 8.5cm (3 x 3 inches) 10cm x 10cm (4 x 4 inches) Share this post Link to post Share on other sites
