v8.11 fault

[mcs 0]

DSP in new 1120 machine we just built is being used for monitor for public view,

The dsp flicks through the 3 cameras not being used and shows a black screen instead of jumping back to cam1 etc,

 

Geovision have been made aware of this issue, waiting for a fix.

[mcs 0]

"It will display a black sceen for the interval time on camera's not selected. There needs to be a skip camera option. It appears to be a software issue,"

 

 

My supplier replied with this

" think we have found the problem.

Being a software multiplexor it isnt skipping the channels properly. We just found the same problem on a GV2008 system with a multiquad card."

[rory 0]

are those channels disabled?

[ruairi 0]

DSP in new 1120 machine we just built is being used for monitor for public view,

The dsp flicks through the 3 cameras not being used and shows a black screen instead of jumping back to cam1 etc,

 

Geovision have been made aware of this issue, waiting for a fix.

 

Are you actually using DSP as the spot monitor controller ?

 

If so, then you need to go into the Spot Monitor Controller setup, Video setting tab and disable the unused channels there.

[mcs 0]

OK

I should have mentioned

this is not the first time I have installed gv cards

this is not the first time I have setup dsp

 

THIS is a fault with the sw it has been tested

I was just letting yall know

 

 

I have setupo many gv systems since 2004 and I know them backwards..

 

 

cheers

[ruairi 0]

OK

I

I have setupo many gv systems since 2004 and I know them backwards..

 

 

Maybe that's the problem, try putting them in the other way ....

[mcs 0]

Done, done and all done guys

this is a fault with this sw version,

 

 

Trust me, I have doubl checked and rechecked everything, there isnt much to do for DSP setup