Daryl733 0 Posted September 11, 2007 Anyone know how to do it ? Appearently their internal litium batt is soldered to the board. You can't just take it out and change. And I've encouter at least 5-6 sets over the past couple of months , usage from 8-2 yrs plus with the batt flat. When the main power is switch off, the DVR loss it's timing. And start recording from 1/1/2000, and it corrupt all the recorded data. You will not be able to jump to a certain date/time using the search. U'll still be able to do vie viewing in rewind mode till u reach that date/time. That'll take days if u are trying to go back 2-3 weeks in 32X rewind mode. And basically u'll have to send the set back to get the board replace once the batt ran out. From what i can see, the batt can take and replace by unsoldering, but it'll void the warranty of the DVR. Share this post Link to post Share on other sites
scorpion 0 Posted September 12, 2007 I have not had any problems here, knock on wood! If the units are under warranty, then the battery would be covered? _________________________________________________ I have more problems with the older units with the power supply on the same board, and the power supply goes belly up. It is very embarrasing when this happens a couple of months after the warranty expires. I wish I could change the parts myself! Too add insult to injury it then blows the external powersupply. (Or is it the other way around)? Thank for the heads up! Scorpion Share this post Link to post Share on other sites
Daryl733 0 Posted September 12, 2007 The batt's is MS621 Rechargable Litium Batt. But appearently, it's not recharging that well after a year or 2. Share this post Link to post Share on other sites
