Geovision 1480 audio problem

[Siiak 0]

Hi all,

 

I just finished the 1480 installation, everything works good, I can listen to audio in live mode, but when I goto pl;ayback, there is no audio.

 

I have enabled audio for 3 cameras, any sugesstions, the speaker icon in playback is greyed out, the recording resolution is 640 x 480 de-inte. and recording codec is geo4.

 

I will really appricaite any sugesstion.

 

Thanks

[bike_rider 0]

Under the "Camera/Audi Install" - where you activate cameras, make sure you have checked "Rec Audio" for that channel

[photys 0]

Also try playback in real time, not frame by frame.

[Siiak 0]

Let me try that play back in real time thing, Thanks for these sugessions.

 

One more thing is Geo4- ASP better then Normal Geo 4 ??

 

Regds

 

Edward

[rory 0]

Geo Mpeg4 is their best quality, but less compression. Their H.264 will be the most compression, while Mpeg4 ASP is between their Mpeg4 and H.264. With the low cost of hard drives today, I dont personally feel extreme compression is so much of an issue anymore,

[jeromephone 6]

check your resloution I think to record audio you have to have video set at 240x480

[Siiak 0]

Thanks the audio problem has been solved I had to switch it to realtime, by defaults its set on frame by frame.

 

Thanks