AVTECH Documentation

[oldhamuk 0]

I've got an AVTECH DVR and can't find the CD that had the documentation on. Does anybody have it they could send over as i'm trying to configure the detection alarms and I'm not sure what the three settings are and how to change the sensitivity.

 

Thanks

 

Mark

[scorpion 0]

Which DVR did you say you had?

[oldhamuk 0]

Its an AVTECH off the top of my head not sure what model. Is one of the entry level DVR's.

[scorpion 0]

http://www.avtech.com.tw/english/product_13.htm

 

Look for it here, and then send me a PM with your email address, DVR type, and I will send you a pdf.

[oldhamuk 0]

That was the same manual on the cd I lost.

 

Thank you very much for your help.

 

Cheers

 

Mark

[Daryl733 0]

Can anyone tell me, which model is the AVC760 is inside that manual ?

Model 1/2/3/4/5 ???

They never specific properly. There's 2 harddisk matrix, each with very different recording time.

 

Also, things to take note, AVC760 is not a true MPEG4 recorder.

It only records at MPEG4 at CIF. When you record at FRAME, it's baically recording at MJPEG.

[scorpion 0]

I hear you loud and clear!!!

 

Please read instructions thoroughly before operation and retain it for future reference.

The image shown above may differ from the actual product appearance.

 

ENGLISH 782, 781, 761, 760, 502, 501, 561, 560_V1.1

[Daryl733 0]

Can anyone tell me, which model is the AVC760 is inside that manual ?

Model 1/2/3/4/5 ???

They never specific properly. There's 2 harddisk matrix, each with very different recording time.

 

Anyone got the answer to this ?

[scorpion 0]

I do not have an answer for that question.

 

I take it as a generic representation to cover all models to include any updated versions.

 

I thought the manual covered the 760, 761, and the 782A?

 

I like how my manuals have a picture of the DVR product, but it does not have the buttons drawn in!!

 

Is there any difference between the AVTech manuals, and CPCam manuals??

[Daryl733 0]

I do not have an answer for that question.

 

I take it as a generic representation to cover all models to include any updated versions.

 

I thought the manual covered the 760, 761, and the 782A?

 

I like how my manuals have a picture of the DVR product, but it does not have the buttons drawn in!!

 

Is there any difference between the AVTech manuals, and CPCam manuals??

 

Precisely. I think 760, 761 records in MJPEG in Frame resolution, MPEG4 in CIF resolution.

http://www.avtech.com.tw/english/product_13_760.htm

But 782A records in MPEG4 in both Resolution.

http://www.avtech.com.tw/english/product_13_782a.htm

 

There's 2 Tables for the harddisk recording timing in the manual.

1 with very short recording time for 500GB, 1 with longer.

I presume 760/761 is the one with the shorter recording time one due to its recording in MJPEG. But I would like a comfirmation instead of just assuming.

[scorpion 0]

The 782A is off the same PC board as the 781. The 781 has the same 500GB 60 days. (4CH, CIF Best Quality, 30IPS)

 

The 781/782A PC board is completely different then the 760/761 PC Board.

 

The manual covers the 781 as well.

 

http://www.avtech.com.tw/english/product_13_781.htm

[Kiwi 0]

Would you happen to know the difference between the 782 and 782A?

 

-Paul

[scorpion 0]

I have no clue about the 782 / 782A difference.

 

 

Model one is not even shown in the manual. It starts off with model 5, 2,3,and then 4.

 

 

Model 1 and model 5 are the same. Model 1 does not have IR port(remote control), and 5 has the IR port.

 

Model 1, and 3 are the same. The difference is the audio in/out.

 

Models 2, and 4 are the same. Model 2 does not have the IR port, model 4 does have the IR port. The audio in/out is different between the two.

 

 

Has anyone manually put in a drive?

 

http://us.liteonit.com/us/index.php?option=com_content&task=view&id=160&Itemid=67

 

http://us.liteonit.com/us/index.php?option=com_content&task=view&id=160&Itemid=67&limit=1&limitstart=2

[scorpion 0]

The 782 is version 1.1

The 782A is version 1.2

 

The 502 is version 1.1

The 502A is version 1.2

_____________________________________________________________

 

Models 1, 2, and 5 appear to record MPEG at FRAME.

Models 3, and 4 appear to record MJPEG at FRAME.

This is according to the CP501, CP502 Manual.

_____________________________________________________________

 

The AVTech AVC 760, CPCam 560, and the Nubix 4BC is a model 3. This is the only one that cannot be backed up with a USB, it has to be backed up by the remote software.

 

http://211.75.84.102/web/manu/760.pdf

 

Model 3 does not have the USB feature. Models 1,2, 4, and 5 do.

 

 

AVC 761, and the CPD 561 is a model 4 MJPEG at frame, MPEG4 at CIF, 1 audio in, with IR.

 

http://211.75.84.102/web/manu/761.pdf

 

 

AVC 781, CPD 501, and the Nubix 4LT is a model 2 MPEG at frame, MPEG4 at CIF, 2 audio in, no IR.

 

http://211.75.84.102/web/manu/781.pdf

 

 

AVC 782A, and the CPD 502 is a model 1 MPEG at frame. Model 1 is the only one with the CD back up, and it has 2 audio inputs.

 

http://211.75.84.102/web/manu/782.pdf

 

Model 5 does not have the power/data bus, but it has 2 audio inputs, CD back up, and it has IR.

Edited November 9, 2007 by Guest

[scorpion 0]

Does the AVC 781 record MPEG at Frame: 720×480 pixels with 30 IPS ??

 

No. It records at 7.5 per camera.