jpriddy 0 Posted September 30, 2004 Hi, I'm running anykeeper 2016 and for the life of me I can't get the remote software to work.I have a linksye router and have two pcs running on it. One is windows xp pro that is for my work and the other is win2000 which is deicated to my dvr. I have assigned both computers there own lan ip address. And I have no-ip to update my always changing dynamic ip address. I Also have tried all different types of port forwarding setting. The truth is I don't even know which port the anykeeper card is using. It has two different places to put an ip address in it and what port. Please any help would be great. Thank You in advanced Share this post Link to post Share on other sites
loop 0 Posted September 30, 2004 If you use the no-ip service, put your xxxx.no-ip.org address as the ip. Some information on ip forwarding on a Linksys BEFSR-41 can be found here: http://www.el-usa.com/tips/Quick_Network.pdf Some more useful info: http://www.dvrsecuritysystems.com/dvr_networking.htm Share this post Link to post Share on other sites
sjw7071 0 Posted May 16, 2006 Anykeeper uses 9091 + ports as default Share this post Link to post Share on other sites
