SUPRA VVTI 0 Posted October 23, 2007 Hello I was just wondering if the old version Dedicated Micros Sprite 2 DVR's have WAN and LAN connection for remote viewing via the internet. I've seen secondhand units for sale, some advertise the fact they have Wan and Lan and others don't. I've had a look on their website and I'm still confused. Thanks in advance Share this post Link to post Share on other sites
galaxy60 0 Posted October 26, 2007 The legacy DS2 has a dedicated 10 Mbit/s network card like all other version this can then be networked onto a router for remote access but you will have to forward some port over to the IP address of the DS2 and setup the gateway etc. You can find more information on how to setup the DS2 and more on my website under the PDF manuals section. www.cctv4all.com Share this post Link to post Share on other sites
SUPRA VVTI 0 Posted October 26, 2007 Thanks, just what I needed to hear. I've just bought a secondhand Sprite 2 , built in dvd, 6 chanel with a 320 gig hard drive . Paid £455 I'm thinking I should've bought a new Avtech instead for £360. Share this post Link to post Share on other sites
galaxy60 0 Posted October 27, 2007 The digital sprites are a very good all in one solution, they have lots of different PTZ protocols and allow you to wire alarms directly into the unit which can be setup to drive your PTZ to a preset. I think you got a fair deal for that price! check the manufactures web site to see if you have the latest firmware if you press menu where the time and date is displayed if your unit is 3.1(165) DVTX then your rmachines motherboard is a DVTX and you should check to see what the latest version is for your DVTX motherboard. http://www.dedicatedmicros.com/software_release/index_firmware.php Networking, enter the relevant details as per my website to download the viewer software just enter the IP address of your DVR in your web browser and you can download the viewer / playback software onto your PC. Share this post Link to post Share on other sites
SUPRA VVTI 0 Posted October 27, 2007 Thanks for pointing me in the right direction for the viewing software and firmware. Useful website! Cheers Share this post Link to post Share on other sites