2008 FPS

[dylanthecat 0]

I have a new 2008 card. I would like to record at 5 FPS round the clock and then change to 30 FPS on motion. No matter what I do the system records at 30 FPS. I set the boxes for max motion FPS and max round the clock FPS , but no change. Any ideas?

[dylanthecat 0]

Geovision has answered my question. Quick response as well. If anyone else would like the info just let me know.

[scorpion 0]

Now that is service!!

[a94cobra 0]

What was the answer?

[dylanthecat 0]

From Geovision:

 

Dear sir:

 

Thank you for your submit to Geovision Technical Support.

 

 

for frame rate setup for GV-2008 card, firstly go to camera/audio

install>Hybrid camera install as picture below.

 

 

Then select the camera that you would like to configure the frames

then go to "configure".

 

 

Then you may set the frames for both max frame rate or non-motion

frames as picture below.

 

Best regards

 

 

GeoVision Technical Support

[avs_23229 0]

From Geovision:

 

Dear sir:

 

Thank you for your submit to Geovision Technical Support.

 

 

for frame rate setup for GV-2008 card, firstly go to camera/audio

install>Hybrid camera install as picture below.

 

 

Then select the camera that you would like to configure the frames

then go to "configure".

 

 

Then you may set the frames for both max frame rate or non-motion

frames as picture below.

 

Best regards

 

 

GeoVision Technical Support

 

I have similar problem. System freezing up after 1-2 days. I want to try to slow it down. Whatever I do in recorded files properties 30fps displayed. Yesterday geovision rep said that in h/w compression mode 30fps is default and cannot be changed. And even more: h/w compression works only when you chose mpeg2 codec! It was a surprise for me since this is not exactly how specs sheet states it.

Dylanthecat, please post pcs you got from geovision again or send them privatively. Somehow they are not visible for me in the forum.

[yutaka_lim 0]

wow.. ! thank a lot.. !