outdoor dvr

[griffonsystems 0]

i have an application where a client wants to add 4 cams on a remote warehouse that isnt temp controlled at all - ive used some middle atlantic racks and enclosures before but those have been in places where there is some type of heating/cooling in the warehouse - this is almost as bad as mounting a dvr outside

 

anybody have a pc enclosure that would work for this application? and im looking to keep the cost low, i have seen industrial stuff for upwards of 800bucks

[CCTV_Suppliers 0]

i have an application where a client wants to add 4 cams on a remote warehouse that isnt temp controlled at all - ive used some middle atlantic racks and enclosures before but those have been in places where there is some type of heating/cooling in the warehouse - this is almost as bad as mounting a dvr outside

 

anybody have a pc enclosure that would work for this application? and im looking to keep the cost low, i have seen industrial stuff for upwards of 800bucks

 

Rack mountable or desktop version?

[griffonsystems 0]

i could do either, put it in a small box or rack box

[CCTV_Suppliers 0]

i could do either, put it in a small box or rack box

 

We use enclosures from this vendor: http://www.1800dummycamera.com/lockbox/index.htm

 

They come with very well built cases and built in fans...

 

Hope this helps...

[Lolo Wolf 0]

you can also check out Mier....http://www.mierproducts.com/default.htm if needed they have a line of temp controlled configs and nema rated boxes as well standard enclosures DVR etc...good quality solid products

[user1 0]

Just stick dsl in and IP cameras with enclosures (ACH13), forget the box...put it elsewhere. That's the beauty of technology...it's there if you want to use it.

[griffonsystems 0]

4 ip cameras running on dsl over the net to a network server would be brutal - low frame rate and low res to get anything close to realtime video recording

[cachecreekcctv 0]

Might take a look at the Hoffman Panel line. Genesis Automation makes great Enclosure Cooling systems, most are refrigerant -based . Hoffman Panel Intake Filters also. Will keep dust, debris out of panel, and still allow air to circulate. Nothing is cheap, but this combination will last for years. I use dozens of these Enclosure Coolers where I work. Very effective.