Lolo Wolf 0 Posted November 30, 2007 Happy to report after 15hr power outage and numerous power on/off starts due to heavy blowing snow (Main line overheads and transformer destruction to underground feeders caused major outages prior to Thanksgiving) and near zero temps the TBT mini PTZs in service have recovered and are stable. The only con: terminal block hookup for wire harness, the connector body is fragile and a prewire would be better aside from that the PTZ is well machined and the overall quality of the gaskets and fit are excellent, the threads were clean and I found the mounting arm design durable and install friendly for high pole mounting. For anybody considering a Mini Ptz with IRcut I recommend these units, however the 24vac product performed better than the 12v model integrated into a 24vac system with a power conversion module.... the 12V on a isolated PS was fine. Share this post Link to post Share on other sites
