TS SS RS examples?

[Snow_death 0]

Can you give me an example of the following settings on a AVTECH DVR. I have a flag flapping in the wind but when I set the settings a little higher it wont detect motion from more than 40 feet. I really don't understand what each one of these fully mean. Thank you so much in advance!

 

LS :

The sensitivity of comparing two different images. The smaller the value is,

the higher sensitivity for motion detection.

The highest sensitivity setting is 00 and the lowest sensitivity setting is 15.

The default value is 07.

e) SS :

The sensitivity regarding the size of the triggered object on the screen (the

number of motion detection grids). The smaller the value, the higher

sensitivity for motion detection.

The highest sensitivity setting is 00 and the lowest sensitivity setting is 15.

The default setting is 03.

Note: The default setting of Spatial Sensitivity is 03, which means once a object

is detected more than 3 grids, the system will get triggered. So the value

of Spatial Sensitivity must be less than the number of grids that you set

up for the motion detection area.

f) TS :

The sensitivity regarding how long the object gets triggered. The smaller

the value, the higher motion detection sensitivity will be.

The highest sensitivity setting is 00 and the lowest sensitivity setting is 15.

The default setting is 02.

g) RE :

The value of RE is a reference for detection. The default value is 10, which

means DVR will compare 10 continuous images at one time according to

the sensitivity of LS, SS, TS simultaneously. The bigger the value, the

higher sensitivity for motion detection. The highest sensitivity is 61.