jeromephone 6 Posted December 7, 2007 I have a gv-800 that is running ver 6.05 it is a D style card about 4 years old. I have one camera that shows an image indicates motion detection and nothing is recorded every other camera is working fine. I checked all setting and see nothing different with this camera (cam1) any ideas as to I am having a computer/camera/geo issue Share this post Link to post Share on other sites
CollinR 0 Posted December 7, 2007 It's somewhere in your configuration, if you can see the feed onscreen it's working properly. You might look inthe IO/Alarm sections, with IO you can disable recording on the cameras by NC switches. If a switch were disconnected or removed that channel would no longer record. Share this post Link to post Share on other sites
rory 0 Posted December 7, 2007 Check the box that says "Register Motion" and see if that helps. Worst case scenario, let me logon and check it out for you. Rory Share this post Link to post Share on other sites
