Danny79 0 Posted December 22, 2007 This is what I get on my camera... anyone know whats wrong? I havent been able to fix it yet since its been raining. Share this post Link to post Share on other sites
UMDRanger 0 Posted December 22, 2007 Have you tried hooking it up to a spot monitor (use a RCA adapter) to see if the picture looks any different? Could be a bad camera, bad wiring/interference, or bad port on the DVR. See what it looks like on the spot monitor, if it's fine, then the problem is the DVR. Try swapping cameras, if the new camera works fine on the existing wire and DVR port, then it's a bad camera. If the new camera is bad too, then it's likely the cable/interference. It's too blury and distorted for me to tell you what the problem might be on the camera. It could be an iris open too much with a bad focus. Just take a slow, methodical problem solving course of action, you'll have the problem nailed in no time. Share this post Link to post Share on other sites
zmxtech 0 Posted December 23, 2007 whats the camera ? the ALC -gain -IRIS etc is up to high. z Share this post Link to post Share on other sites
rory 0 Posted December 23, 2007 Going by another post, I take it is this camera? http://www.specotech.com/cart/products/productDetails.asp?prodID=884 Need to adjust the IRIS and may need to leave AGC disabled. http://www.cctvforum.com/viewtopic.php?p=70211 Make sure the lens cover is clean also. Share this post Link to post Share on other sites
Danny79 0 Posted December 23, 2007 Yeha that is the camera I have that you linked. Thanks for teh help Ill keep you posted if it fixed it. Share this post Link to post Share on other sites