parman 0 Posted January 17, 2008 I keep getting a screen that says Recyle Empty then you have to press OK then a screen comes up that says Disk Space Low Please Check Log Location and you have to press OK to that. Then when I check, all my cameras have stopped recording. What is up with that. I have GV-1240 with 11 cameras hooked to it. P4 Dual running WinXP and Geovision Version 8.01. It has run perfectly for 1.5 years. Last week the computer did it's usual reboot that it does every so often. Then when it came back up it froze half way threw the windows start up screen. Took it to computer guy. He did some simple checks and said all was fine and he was alble to get restarted. Then after just less than a week same crashing problem except in order for him to get it to come back up he had to take out the driver for the video card. When he tries to load new or older driver, same thing, black screen half way threw loading it. Left the video card driver out and is running windows driver, and have new video card ordered. However now this other problem has started with the recording stopping. Any help would be great. Share this post Link to post Share on other sites
john@usaginc.com 0 Posted January 18, 2008 what kind of hard drive do you use? ive seen drives set improperly and getting so fragmented they start failing. it would account for your windows problems Share this post Link to post Share on other sites
Rebco 0 Posted January 18, 2008 do yourself a favor and replace the Hard drive. Unless you want to waste more time. Share this post Link to post Share on other sites
parman 0 Posted January 20, 2008 Thanks, but it turned out after doing a little more online research I should use the repair database utility under the start menu>gv and voilla all was working perfect again. Even my original video card could have the software reinstalled on it and it worked fine. Share this post Link to post Share on other sites
