blkpookie 0 Posted January 30, 2008 Maybe someone can help me out here. I have one DVR hooked up with a router in one location and that one works great. Thanks to the people here who helped me out with that. Now I have a second DVR with no router. This location has no computer. So the modem is straight into the DVR. I setup the modem with a laptop and was getting internet, so I know the modem is working. In the DVR setup menu where the gateway goes do I need to input the IP of the modem????? Do I need to do anything with the subnet mask or the madeup IP address of the DVR?? Any help would be great. Thanks to all, Christian Share this post Link to post Share on other sites
Kiwi 0 Posted January 31, 2008 You should be able to set the DVR to DHCP and those settings will be made for you. Otherwise, set the gateway to the modem's address and the netmask to whatever the modem is set for, often 255.255.255.0 or 255.0.0.0 Share this post Link to post Share on other sites
zmxtech 0 Posted January 31, 2008 You only need 1 router -It may have switchports 4 or so you can use them or by a switch say 4or 8 port -crossover lead If you use one z Share this post Link to post Share on other sites
rory 0 Posted January 31, 2008 All network settings in the DVR should be that which the ISP gives you if using a static IP. If you want to use DDNS then you will need a router. Then again, it depends on your modem and ISP, and ofcourse the DVR. Also as mentioned if just using DHCP then it will probably work like that but your IP will change. Share this post Link to post Share on other sites
securitysys 0 Posted January 31, 2008 Please help us help you. Do you have a Static Ip Address from your Service Provider Is the IP Address provided by the modem static or dynamic What brand / model Modem do you have? What brand / model DVR do you have? If you have a static or dynamic ip address from your service provider and a dynamic from your modem, plug it in, set it to DHCP, and your set. If you have a static or dynamic ip ip address from your service provider and a static ip address from your modem, plug it in, add your ip address, gateway address, subnet mask, and dns information. If you have a dynamic ip address, you have one more step, you need your DDNS provider. If you provide us with the brand / model of the DVR & Modem we can help you with that. Some DVRS have built in DDNS support, some modems have built in DDNS support, but depends on the brands. Best of Luck! Share this post Link to post Share on other sites
todoenred 0 Posted February 1, 2008 what kinf of modem do you have? ADSL o cable?? regards Share this post Link to post Share on other sites
djslack 0 Posted February 2, 2008 A router only allows multiple computers to share a single network connection (modem), so you don't need it here. Your modem appears to be handing out addresses via DHCP if you plugged in your laptop and it worked. You should be able to set your DVR to DHCP (otherwise known as "Automatically assign a network address") and it will be online. As others have mentioned, though, unless you specifically have a static IP address provided by your cable/DSL provider, your IP address will change. This is where the dynamic DNS services come in. Alternately you can call your ISP and tell them you need a Static IP address... if they don't charge too much for it this is the easiest way. They will then give you all the IP address, gateway, subnet information you need to put into your DVR to make it work. Share this post Link to post Share on other sites