texasdyme 0 Posted February 6, 2008 I'm trying to port forward a Netopia router/modem and in the port forward section it asks for the following: port range from and to ( I got that) Internal IP (is this the IP address of the DVR) Port (what port goes there) Also, if I do an IP config, does the ip address that shows there, is that the ip that goes in the dvr? Thanks Share this post Link to post Share on other sites
Lolo Wolf 0 Posted February 6, 2008 look for your Netopia model# here http://www.portforward.com/english/routers/port_forwarding/routerindex.htm good walk through on fowarding and config Share this post Link to post Share on other sites
chanyickwai 0 Posted February 20, 2008 Are you configuring a DVR? what's your IP address and port required for this DVR? Then you should put in corresponding info to netopia router for port forwarding. This is my understanding. Regards, Dove Share this post Link to post Share on other sites