chris_190 0 Posted February 12, 2008 Greetings!!! This is my first post.... ok I just got thisdvr card SC - PVS1 which came with WSDSR Software. This card has 4 bnc inputs and one audio in (1/8in input) I have a bnc cable and an rca cable. I cut them both and adapted the bnc to the rca. I started the software which runs fine and attached my Panasonic DVX 100 to the rca which in turn becomes bnc and inputs into the pci dvr card and eventually outputs the signal from the dvx 100 on my dvr software. I ran the above setup and all I see is a blue screen in my DVR software... Now all the drivers of the pci dvr card are installed properly (video and audio) and everything runs at it should but the only problem is it won't see the signal... My question is : Is it a certain type of cameras that only work with certain types of bnc dvr cars? Am I doing something wrong..... I do plan to get some infrared outdoor cameras but I just got this card and wanted to test to see how it records.... Do I need some special convertor? Your help will be appreciated.. Thank You Chris Share this post Link to post Share on other sites
VST_Man 1 Posted February 12, 2008 - update your video drivers - reduce your video acceleration settings Share this post Link to post Share on other sites
